In this festive graphics project designed for primary aged kids, students will use nets to make parts from card and paper, which they will then assemble into a lantern shaped like a Christmas star. This is a free resource that encourages learners to have fun with maths. Free handouts and templates are available to download below. Oh ho ho, and please do share your creative highlights with us @IETeducation #SantaLovesSTEM

Secondary classroom poster looking at AI and its applications in the modern world. Download the single poster or order a full set for free from the IET Education website.

In this activity learners will make use of the theme of Halloween to make a flapping bat decoration. They will learn about the history of Halloween and why bats are an important part of it. They will then learn how to make a simple mechanism for a flapping bat. Finally, they will test and adjust their flapping bat and observe how it works. This activity could be used as a main lesson activity to teach about basic marking out, testing and model making skills. It could also be used as part of wider scheme of learning focussed on designing and making products within a Halloween-themed context, alongside other IET Halloween themed resources. Activity: Making a flapping bat for a Halloween decoration Learners will make use of the theme of Halloween to develop their knowledge and understanding in Design & Technology and Engineering and make a flapping bat to decorate their home or classroom. Tools/supplies needed: Printed template Good quality card (corrugated or grey card) String Small change, 1p or 2p pieces, washers or small weights Scissors Sticky tape A stick to hold the bat Black paint Pencil Googly eyes (optional) Craft knife Extension Make another bat from thin painted plywood to make it more weatherproof Cut out shapes to make another type of animal - for example, birds or pterodactyls Research more about bats and how they act The Engineering Context Engineers can learn a lot from nature in terms of how to design and make products and structures. For example, how bats fly and ‘see’ in the dark – this is similar to the principles of sonar and radar. Iterative design is a key strategy for engineers to use when designing and producing ideas for products. Suggested learning outcomes This resource combines Design and Technology with Engineering, with the aim learners will be able to understand the origins of Halloween and how it is celebrated today; be able to make a flapping bat decoration for Halloween; be able to test and balance the bat decoration to make it work well; and understand how iterative design works and is how it is used. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

This resource focusses on learners working out the names of the main bones within the human body and then using their knowledge of these bones to complete the activity. In this project learners will learn about the movement of the bones in the human body. They will then make their own dancing skeleton from card. Finally, they will test their skeleton and observe how it works. This activity could be used as a main lesson activity to teach learners about human anatomy. It could also be used as part of a wider scheme of learning focussing on the human body, mechanisms and movements, or designing and making products within a Halloween-themed context, alongside other IET Halloween themed resources. Activity: Making a dancing skeleton with movable arms and legs Learners will make use of the theme of Halloween to learn all about the skeleton – what it is, it’s function and importance within the human body. Tools/supplies needed: Scissors Card or cardboard Glue Paper fasteners String Drinking straws Tape Eraser or ball of sticky tack Optional: thin wood/bamboo skewers with the points removed Extension Can you add linkages to make the body move differently? Or make more than one limb move at the same time? Can you make the arms and legs bend at the elbows and knees? The Engineering Context Understanding about how something works helps engineers understand how to improve it. It can also give inspiration for other products or objects. Learning how the human body works and moves can help Engineers to transfer this into other objects, such as walking robots or prosthetic limbs. Suggested learning outcomes This resource combines Science, Design and Technology and Engineering, with the aim that the learners will be able to know what is meant by a skeleton, be able to name and locate major bones in the human body and be able to make a model of a skeleton using graphics materials. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions below as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

In this activity learners will make use of the theme of Halloween to make a spider’s web decoration. They will learn about the history of Halloween and why spiders and spiders’ webs are an important part of it. They will then use threads to make their own spiders web on a card backing. This activity could be used as a main lesson activity to teach about threading and simple textiles hand-making skills. It could also be used as part of wider scheme of learning focussed on designing and making products within a Halloween-themed context, alongside other IET Halloween themed resources. **Activity: Making a spider’s web for Halloween ** Learners will make use of the theme of Halloween to learn why spider’s make webs, to explore the properties of spider’s webs and use their finding to create their own web using string or wool. **Tools/supplies needed: ** String or wool (or cotton for the extension) Scissors and/or craft knife A large piece of corrugated cardboard e.g. from the side of a box Optional Spider cut-outs Googly eyes Glue gun or superglue The Engineering Context Engineers can learn a lot from nature in terms of how to design and make products and structures. For example how spiders’ webs influence the design of suspension bridges. **Suggested learning outcomes ** This resource combines Design and Technology with Engineering, with the aim that the learners will be able to understand the origins of Halloween and how it is celebrated today, know how a spider makes its web and be able to use thread and knots to construct a spiders’ web. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions below as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

Simple sliders and levers can be used to create movement in a picture. This activity teaches participants how levers and sliders work and how they can be used to create an engaging moving picture in a card or a book. How can I teach levers and sliders? This could be used in Key Stage 1 as a stand-alone activity or as a KS1 introduction to a design and technology project, such as: a greetings card - for example, a Christmas card where Santa’s sleigh moves across the sky a story detailing a journey – for example, inspired by a book they are reading (such as ‘We’re going on a bear hunt’); alternatively, this could be a fictional journey of their own devising the development of the book could be carried out as a class activity where each table or group of pupils works together to produce one or two pages, contributing to the book produced by the full class. This could also be linked to a story-writing activity in literacy a moving display - for example, charting the different activities carried out during a day, where the slider or lever indicates the changing time. On completing either model, pupils could also apply colour to their mechanism or add details to the background. Tools/resources required Copies of the moving pictures handout, printed on card, 1 per pupil (plus spares) Plain card (for the simple slider and lever backgrounds) Split pin-type metal fasteners (1 per pupil plus spares – see image in presentation) Scissors Sticky tape Glue sticks Optional Coloured pencils Hole punches (ideally single hole punches) Pre-made models of each mechanism, for demonstration Download the activity sheets for free! The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. All activity sheets and supporting resources for this KS1 DT activity are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your learning highlights with us @IETeducation.

Learn how to make a shadow puppet for Halloween using card, craft sticks and sticky tape This resource focuses on making shadow puppets and developing supporting knowledge about the relationship between light and shadow. This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within design and technology and science. This could be used as a one-off activity in D&T or science and is designed to be carried out individually. The ‘character’ for the puppet made by each learner could be based on personal preference or could be linked to learning in literacy – for example, a character from ‘Wind in the Willows’ if that book is being studied. If linked in this way, the activity could be carried out in small teams, with each team member making a different character from the story. Additional time could be allowed to research the character for the puppet. The shape of the puppet could be taken from the associated handout, from outlines of images found on the internet, or drawn by hand by the learners. This is an engaging and practical exercise for KS2 that will develop students’ science knowledge and encourage their creativity. How long will this activity take? This activity will take approximately 20-40 minutes to complete. It should be noted that there are options presented in the activity sheet which could extend the time needed to carry out this activity. Tools/resources required Card (photocopies of handouts, if used) Masking tape Craft sticks Tracing paper (for screen) Large boxes (for extension activity) Scissors Torches The engineering context Engineers need to understand how light behaves when designing products for many practical applications. For example, when designing buildings, they may consider the provision of windows and artificial lighting; and when designing cars, they may consider the power and position of both internal and external lights and the placement of mirrors. Suggested learning outcomes By the end of this activity students will know that blocking the path of light causes a shadow and to be able to use scissors to make a graphic product. This resource focuses on making shadow puppets and developing supporting knowledge about the relationship between light and shadow. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation.

Secondary classroom poster where students can learn about the concept of potential difference through analogy. Download the single poster or order a full set of posters for free from the IET Education website.

Design and build your own water filtration system Water is crucial to human life, but it can also be a killer. Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases. Activity info, teachers’ notes and curriculum links This activity gets students to investigate different possible ways of filtering dirty water to improve its cleanliness by designing and building their own water filtration systems. The lesson can be extended with a practical session in which students work in small teams to investigate the salinity of different water samples – see the related extension activity ‘Water Treatment Systems’ within the related activities section below. The engineering context Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases. Engineers and scientists work to provide us with safe, clean drinking water, with efficient and clean methods for disposing of our waste water and practical drainage solutions. Suggested learning outcomes Students will be able to recall the different types of impurities that can contaminate water. As well as this, they’ll know how to describe how water filtration equipment acts in several different ways to produce potable (drinkable) water. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

In this fun and festive graphics project designed for secondary school students, learners focus on the making of a lantern shaped like a Christmas star using folded card and paper. This activity allows the theme of Christmas to develop their knowledge and skills in Design and Technology and Engineering. A activity sheet, presentation and templates are available to download for free. And please do share your classroom learning highlights with us @IETeducation

Primary classroom poster showing useful rules to observe when using electricity in the home. Download the single poster or order a full set of posters for free from the IET Education website.

In this activity learners will make use of the theme of World War 2 to learn about the ‘Dig for Victory’ campaign and how it was used during the war. They will then design their own garden, considering the types of fruit and vegetables that could be grown within it. This activity could be used as a main lesson activity to teach about sustainable ingredients and how these can be grown at home. It could also be used as part of wider scheme of learning focussed on food preparation and nutrition, or as part of a wider theme-based project on World War 2. Learners could subsequently choose one of their class designs and plant the garden. This is one of a series of resources that are designed to allow learners to use the theme of the second world war to develop their knowledge and understanding in Design & Technology and Engineering. This resource focusses on learners designing a ‘Dig for Victory’ garden. Tools/supplies needed: Squared paper Rulers Pencil/pens Coloured pencils Extension Create a table showing which fruits and vegetables will be seeds and which will be seedlings Design a poster to encourage your neighbours to ‘Dig for Victory’ The Engineering Context Food scientists need to understand how different items of food are grown to meet different nutritional needs. For example, growing on a small scale to provide food for a family. Suggested learning outcomes This resource combines Design and Technology with Cooking and Nutrition, with the aim that the learners will be able to be able to understand what the ‘Dig for Victory’ campaign was and why it was used during WW2 and be able to design a ‘Dig for Victory’ garden where a household can grow its own food. Download our activity sheet and other teaching resources for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions below as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

Learn about flight and making a successful paper aeroplane. Learners will make a launching mechanism to propel a paper plane further than they could throw it. Finally, they will test their launchers and observe how they work. This activity could be used as a main lesson activity to teach learners basic marking out and model making skills. It could also be used as part of a wider scheme of learning focussing on the history and development of design, technology and engineering, alongside other flight-themed IET resources. This is one of a series of resources that are designed to allow learners to use the theme of the second world war to develop their knowledge and understanding in Design & Technology and Engineering. This resource was inspired by the theme of flight. It supports the teaching of design and technology in context by making a paper aeroplane and launching device. Tools/supplies needed: Thick paper or card A4 Scissors Pencil Ruler Elastic band Paper clips Tape or stapler Extension Add decoration such as camouflage to your launcher What happens if you use a shorter or longer elastic band? Could you improve this launching device using other materials? The Engineering Context Understanding about the history of engineering and design helps engineers to learn from past successes and mistakes. For example, learning about how mechanisms are used to help create enhanced movement, such as the catapult for launching panes from carriers. Suggested learning outcomes This resource combines Science, Design and Technology and Engineering, with the aim that the learners will be able to make and test a paper aeroplane and launcher and be able to develop practical skills in manipulating materials skilfully. Download our activity sheet and other teaching resources for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions below as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

**Learn about the protection given to people in the Second World War and make a model of an Anderson shelter from card. ** Activity: Create a cardboard model of a World War 2 air raid shelter This is one of a series of resources that are designed to allow learners to use the theme of the second world war to develop their knowledge and understanding in Design & Technology and Engineering. This resource was inspired by the themes of the World War 2 and Flight. It supports the teaching of design and technology in context by making a model of an Anderson (air raid) shelter using graphic materials. This activity could be used as a main lesson activity to teach learners about The Second World War. It could also be used as part of a wider scheme of learning focussing on structures or as a focussed practical task focussed on model making. Tools/supplies needed: Scissors Card or cardboard (cereal box) Glue sticks Masking tape (optional) Coloured pens/pencils Extension Design a suitable layout for the interior – what would be needed? How would you arrange everything? Remember a whole family would be inside! The Engineering Context Understanding about how to keep people safe inspires engineers to develop new materials, objects and structures. This develops the world we live in and improves the quality of living for all. Suggested learning outcomes This resource combines Design and Technology and Engineering with History , with the aim that the learners will be able to know what is meant by an Anderson Shelter and be able to follow instructions and model an idea accurately. Download our activity sheet and other teaching resources for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

In this activity learners will make use of the theme of World War 2 to learn about how FM radio was used by the Allied forces during the war. They will then assemble a circuit that acts as an FM radio receiver. Finally, they will test their circuit to see how well it works. This activity could be used as a main lesson activity to teach about how radio and radio systems work, and how to assemble a radio receiver circuit. It could also be used as part of wider scheme of learning focussed on electronic systems and circuits, or as part of a wider theme-based project on World War 2. This is one of a series of resources that are designed to allow learners to use the theme of the second world war to develop their knowledge and understanding in Design & Technology and Engineering. This resource focusses on learners assembling an FM radio receiver circuit. This is a challenging activity that involves assembling a bought-in kit of parts using soldering irons. It is aimed at Year 6 pupils with good ability in Design & Technology. Tools/supplies needed: Solder FM radio kit including PCB and all required components Soldering irons Soldering iron stand and damp sponge Desk protector board Safety glasses Wire cutters Wire strippers Extension Design a casing for the radio circuit Make a model of your casing in card Design a carry case for the radio The Engineering Context Engineers need to be able to understand how electronic circuits are made and how they work, for example how to construct and investigate the function of a radio circuit. Engineers need to understand the historical context of different technological inventions, such as radio, and how they were used. This helps them to learn from mistakes made and produce improved products and systems. Suggested learning outcomes This resource combines Design and Technology and Engineering, with the aim that the learners will be able to understand how FM radio was used during the second world war, to be able to make and test an FM radio receiver circuit and to be able to use circuit assembly and soldering equipment safely. Download our activity sheet and other teaching resources for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. You can download our step-by-step instructions below as a classroom lesson plan and PowerPoint presentation. Please do share your highlights with us @IETeducation.

Primary classroom poster explaining what forces are and how they act. Download this single poster or order a full set of posters for free from the IET Education website.

Structured class debate on the location of a new wind farm There is much debate about the issues created by carbon emissions and how renewable energy sources can help resolve these challenges. Most people agree that renewable energy is a good thing, but many oppose to having wind turbines built near their neighbourhood. In this role-play activity, participants take on different roles to debate a proposed wind farm. In pairs, students discuss whether their character would be in favour of the proposed wind farm and prepare a two-minute talk to share their case with the group. Afterwards, divide the larger groups into ‘for’ and ‘against’ and bring together all the individual statements to form a strong, coherent case. Four people are chosen to give two reasons to support their argument. Activity info, teachers’ notes and curriculum links This activity has been written with a strong science bias. However, it can easily be taught in design and technology with either a systems and control approach or from a ‘sustainability’ angle, looking at the topic of wind farms and the future of energy production. The ‘sustainability’ perspective will provide an activity that could involve design and technology, geography and citizenship. Download the activity sheets for free! All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your classroom learning highlights with us @IETeducation The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.

Explore the properties of solids, liquids and gases In this unit, students will develop their understanding of the properties of the three states of matter. They will have the opportunity to experiment with a range of different substances that do not fit neatly into the traditional states of matter model. Activity info, teachers’ notes and curriculum links An engaging activity where students will explore materials to develop an understanding of why they behave the way they do. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

Primary classroom poster giving a closer look at exploded views and how you can draw them for yourself. Download the single poster or order a full set of posters for free form the IET Education website.

Develop an understanding of levers and build a popsicle stick catapult from craft sticks with this free STEM lesson plan. This is an exciting and engaging way to learn about physics and engineering. With the right materials, build a simple yet effective catapult capable of launching chocolate eggs up into the air! This lesson plan is perfect for KS3 students and can be used as a fun one-off main activity to introduce levers. This is one of a set of resources designed to allow learners to use Easter themes to develop their knowledge and skills in Design & Technology, Mathematics and Science. This resource involves making a simple catapult which works as a lever to propel a chocolate or mini egg. This activity will take approximately 50 – 70 minutes to complete. Also included is a fun crossword using words from the activity to promote sticking learning. Tools/resources required Craft sticks (at least 7 per learner) Small elastic bands (at least 7 per learner, plus spares) A teaspoon (metal or plastic) Chocolate mini eggs (or similar) For the extension activity: Pencils (or similar, such as dowel rods) Elastic bands The engineering context Levers are one of the simplest machines and are used in many applications. These include pliers, scissors, brake pedals and wheels and axles. The principles of levers are also used in many applications when designing sports equipment, such as cricket bats, golf clubs and hockey sticks. Suggested learning outcomes After completing this Easter themed engineering resource students will be able to describe the three classes of lever and they will be able to make a structure. Download the free Build a popsicle stick catapult activity sheet! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation